Du-Bro Fuel Line Barb, 5/32'' (DUB814)
$3.20
Skip to product information
Only 4 Left!
Du-Bro Fuel Line Barb, 5/32'' (DUB814)
$3.20
Secure Retention
Prevents Line Slippage Always
Solder-On Fit
Designed For Brass Tubing
Tank Protection
Internal And External Use
In Stock
Fuel System SecurityReliable Performance For Nitro Systems
The 5/32" I.D. Fuel Line Barb offers simple yet crucial protection against loose fuel lines in your model setup. Engineered for nitro RC vehicles, it creates a secure raised lip on brass tubing to prevent accidental disconnection.
Professional Fuel Line LockPrevent Engine Stalls Easily
Prevent costly engine lean-outs and unexpected flameouts with the 5/32" I.D. Fuel Line Barb. Designed for quick solder-on installation, this hardware component adds a retention ridge onto 5/32-inch metal fuel tubing. Whether installed on interior fuel clunk lines or exterior tank nipples, these barbs firmly grip silicone fuel tubing under intense vibration and high heat. Upgrade your glow powered RC aircraft, cars, and boats for maximum fuel system reliability.
Hardware SpecsExact Measurements And Details
Compatible Vehicles
Nitro RC Aircraft, Cars, and Boats
Part Type
Fuel Line Barb / Fitting
Material
Brass Alloy
Inner Diameter
5/32 in
Installation Method
Solder-on
Placement
Internal and External Fuel Tubing
Dimensions
Fits 5/32 in outer diameter brass tubes
Weight
0.1 oz
Key AdvantagesBuilt For High Vibration Systems
Line SecurityPrevents silicone fuel lines from slipping off
Easy InstallationQuick solder-on fit for brass tubing
Versatile PlacementSuitable for internal tank clunks and external lines
Precision FitDesigned specifically for 5/32 inch tubing
Engine SafetyHelps eliminate air leaks and engine flameouts
Frequently Asked QuestionsEverything you need to know
How do I install the 5/32" I.D. Fuel Line Barb on my metal fuel lines?
Clean the end of your 5/32 inch brass fuel tube, apply soldering flux, slide on the 5/32" I.D. Fuel Line Barb, and solder it securely in place using a soldering iron.
What RC models are compatible with the 5/32" I.D. Fuel Line Barb?
The 5/32" I.D. Fuel Line Barb is universally compatible with nitro and gas RC planes, cars, trucks, and boats using 5/32 inch metal fuel tubing.
Can I use the 5/32" I.D. Fuel Line Barb inside the fuel tank?
Yes, the 5/32" I.D. Fuel Line Barb is designed to secure fuel lines both inside the fuel tank on clunk lines and on external tank fittings.