Ercoupe Rubber/Electric Powered 36" Wingspan
Ercoupe Rubber/Electric Powered 36" Wingspan
Erco Ercoupe, Rubber or Electric Powered, 36" Wingspan
Overview:
A beautifully laser cut model of the Erco Ercoupe. Engineered specifically for electric R/C by designer Pat Tritle to use off the shelf flying packages.
All balsa, lightweight colored tissue covering, three foam wheels, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, and vacuum molded cowl.
Features:
- Stick and tissue construction, many small sticks glued together to form the airplane and then covered with tissue paper.
- Wingspan: 36"
- Airfoil: Flat bottom
- Over 140 laser-cut parts and hand selected balsa.
- Lightweight colored tissue paper covering.
- Full size plan and step-by-step instructions.
- Vacuum molded parts.
Required for RC:
- Electric Motor: Speed 280 w/2.8:1 or higher gear drive
- Radio: 3-channel with micro size receiver
- Servos: Two micro size for rudder and elevator
- Electronic Speed Control: 5A with BEC
- Battery: 11.1V 700mAh Lithium Polymer
- Propeller: 9x4.7 electric
Battery: | Sold Separately |
Charger: | Sold Separately |
Completion Level: | Kit |
Material: | Wood |
Minimum Required Radio: | 3-channel with micro size receiver |
Minimum Speed Control: | 5A with BEC |
Motor Size: | GWS A or MPI EPU-6 drive unit (required) |
Power Type: | Electric |
Product Length: | 25" |
Radio: | Sold Separately |
Receiver: | Sold Separately |
Recommended Motor Battery: | 2S 7.4v 700mAh LiPo |
Servos: | Sold Separately |
Speed Control: | Sold Separately |
Wingspan: | 36" |
- Choosing a selection results in a full page refresh.
- Opens in a new window.