Heimschmitt Sunday Fighter Kit

Old School Model Works Heimschmitt Sunday Fighter Kit

"Achtung! Come fight mit me!"

Fast, but not too fast. Maneuverable, but not tricky. A snap to build and surprisingly rugged compared to most. The original Sunday Fighters were the brainchild of Ken Willard back in the early 1970's. His were small, .049 powered 3-channel models and proved quite popular. Now, we've taken this idea, enlarged, and re-engineered them to make them as much fun to build as they are to fly.

You should see them take evasive maneuvers in Dog Fighting. Evade with snap rolls into spins, Immelmann turns and a loop. Our radio-controlled Sunday Fighter airplane kits just might be the most fun you’ve had in a long time.

Because of the interlocking design and high quality laser cutting of the parts, the Sunday Fighter is a quick build. Not only does it build quick, but it also builds straight and true as all of the parts are designed to align properly with a minimum of fuss and alignment tools.

The wings are removable for storage/transport and for giving access to the extra large cabin area. From there you have easy access to install most any brand of radio and control linkages. However, the fully assembled model can fit in the trunk of most mid-sized cars.

Up-front, we’ve designed in a hatch that covers the battery/tank compartment. This area will easily handle 3s packs and 6 ounce tanks.

Whether you choose to power your Sunday with electric or glow power, we’ve got you covered. Glow engines can be mounted side, inverted or even upright with a little modification. Electric motors can be mounted using the included Motor Box which will help space your motor to the proper distance.

Go true "old-school" with 3 channel control, or opt for functional ailerons (4 channel).

Features:

Premium USA Hardware Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

Dual Ailerons
Mounted under the lower wing, these two pre-cut aileron hatches make it easy to install the aileron servos.

WEB-LOCK Construction
There's nothing else like it. Our exclusive WEB-LOCK construction allows you to assemble the wings with a minimum amount of fuss.

Bolt-on Main Gear
Bending your own landing gear is hard. So that's why we include pre-bent main landing gear wire ready for you to assemble.

Front Hatch
Held in with magnets, this xtra hatch gives you easy access to batteries or fuel.

Included Motor Box
For electric power, we include the pieces to build this electric motor mounting box.

Want to see more?
Click here to bring up a Flickr photo album of our customer's Sunday Fighter builds.

All Old School Model Works kits feature:

Precision Laser-cut Parts
Included in every Old School Model Works kit are all the wing ribs, fuselage formers, and other wood needed to build the aircraft.

Interlocking Parts
We've engineered each kit to give you the best chance of success. Each laser-cut part interlocks with the next for an accurate and secure joint.

Rolled Plans
Each of our kits contains a set of rolled plans, never folded. They are full-size, highly detailed, and computer-drawn for accuracy.

WEB-LOCK Wing Construction:
Our exclusive wing design and construction techniques give you everything you need to easily build a straight and true wing with a minimum amount of fuss.

Illustrated Instructions
A step by step manual with plenty of photo illustrations is included in each kit. We also provide links to online, clear, hi-rez photos for each step.

Pre-Bent Landing Gear
Bending your own landing gear is hard. So that's why we include pre-bent main landing gear wire ready for you to assemble.

Additional items needed to complete the Sunday Fighter kit:

• Propeller
• Engine/Motor mount & mounting hardware
• 2-5 servos depending on setup: 2 mini for elevator/rudder, 2 Sub-Micro for ailerons/throttle
• “Y” servo harness (for ailerons)
• Pushrods (two 5” for ailerons, two 20” for elevator & rudder, one 9” for throttle if glow powered)
• Clevises for the pushrods (8 if electric, 10 if glow)
• Two 3.5” diameter wheels. We recommend Du-Bro's #350V Vintage wheels for the proper look.
• One tailwheel assembly
• If glow, tank and fuel tubing
• Covering

Heimschmitt manual.