Suspension Travel Limit Straps 90mm (Gunmetal)(2)
Suspension Travel Limit Straps 90mm (Gunmetal)(2)
Suspension Travel Limit Straps, 90mm (Gunmetal) (2)
Overview:
Limit straps are used to take stress off shocks and to control suspension extension. When crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and prevent the vehicle from rolling, and keeping suspension articulation intact. From climbing, to droop control, to super scale looks, these limit straps will keep you running.
These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks. Tested on extreme off-road terrain. Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm.
Designed for use with these vehicles:
- Axial AX-10 Deadbolt
- AX-10 Ridgecrest Crawler
- EXO 4WD Terra Buggy Kit
- SCX-10 Scale Truck
- Wraith 4WD Rock Racer RTR
- XR10 Crawler, Yeti
- ECX 1:18 Temper Rock Crawler
- Vaterra Ascender
- 1:10 Chevrolet K5 Blazer
Length eye-to-eye: | 90mm (3.54 inch) |
Total length end-to-end: | 97mm (3.81 inch) |
Nominal strap size: | 8x2.3mm (0.31x0.09 inch) |
Eyelet hole size: | 3.3mm (0.13 inch) - for a 3mm screw |
- Choosing a selection results in a full page refresh.
- Opens in a new window.